SKU: R1051BV
Top handle on/off volume control
Service stops included
Primary screens at the cartridge
Cast brass construction
Bottom outlet for tub filler only. A separate flow control valve and/or trim required for this application.
Back of valve to finished wall 3 1/2 inch min., 5 3/4 inch max.
Flow rate 6.7 GPM at 60 PSI
1/2 inlets, 1/2 female outlet standard on top
Complete with mud guard for installation
If PEX is utilized, oversize the supply line to 3/4 inch for full flow capacity
Bottom control sets temperature
Extension kit included, may be cut to length required
Must order trim to complete
Top handle on/off volume control
Service stops included
Primary screens at the cartridge
Cast brass construction
Bottom outlet for tub filler only. A separate flow control valve and/or trim required for this application.
Back of valve to finished wall 3 1/2 inch min., 5 3/4 inch max.
Flow rate 6.7 GPM at 60 PSI
1/2 inlets, 1/2 female outlet standard on top
Complete with mud guard for installation
If PEX is utilized, oversize the supply line to 3/4 inch for full flow capacity
Bottom control sets temperature
Extension kit included, may be cut to length required
Must order trim to complete